If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Weathering

Discuție în 'Model Railways' creată de richard_3672, 30 Noi 2008.

  1. richard_3672

    richard_3672 Member

    Înscris:
    22 Iul 2008
    Mesaje:
    302
    Aprecieri primite:
    0
    Ocupație:
    student
    Locație:
    Darlington/Preston
    I'm thinking of weathering my WD 2-8-0 model and I was just wondering if anyone has any guides/tips?
     
    richard_3672, 30 Noi 2008
    #1
  2. Bulleid Pacific

    Bulleid Pacific Part of the furniture

    Înscris:
    14 Apr 2007
    Mesaje:
    4.033
    Aprecieri primite:
    1.101
    Ocupație:
    A Thingy...
    A mixture of dry brushing (ie. putting paint on the brush, then dabbing it on a cloth until it's virtually dry, then applyting it to the model in a stippling action) and chalk pastels is good. White around the clack valves and the water filler cap would indicate scale. If it's a BR WD, then you've got a lot of weathering ahead of you! White scale got absolutely everywhere, and the rust on the smokeboxes was more reminiscent of Barry Scrapyard than an operational locomotive. Also, apply some substitute for ash on top of the front bufferbeam below the smokebox door, which represents sloppy clearance of ash at the end of the day. If you really want to go to town, dry brush a whitish-grey colour for road dirt, working around the loco number and maybe the BR crest, and that should do it. I personally don't want to weather my locomotives in case I had to sell them for some reason, but if I did, I'd use my A-Level in Art in this fashion. Hope this is of use to you...
     
    Bulleid Pacific, 1 Dec 2008
    #2
  3. 34007

    34007 Part of the furniture

    Înscris:
    16 Mar 2007
    Mesaje:
    3.166
    Aprecieri primite:
    2
    Sex:
    Masculin
    Locație:
    Hampshire
    On 1 of my locos many moons ago I used an acrylic based water paint and added coal dust which I broke up mixed with diluted PVA...I used the effect with many colours mixed on the board till I found the correct one I wanted.
    Hope that helps - I'm sure there are plenty of other ways to get the effect you want! It's down to personal choice at the end of the day.....
     
    34007, 1 Dec 2008
    #3
  4. NDTSDN

    NDTSDN Part of the furniture

    Înscris:
    9 Oct 2005
    Mesaje:
    2.864
    Aprecieri primite:
    0
    Locație:
    A, A
    Obtain a good photograph of what you like to achieve and use this as a basis.

    The Art of Weathering by Martyn Welch is a superb book. http://openlibrary.org/b/OL12103450M
     
    NDTSDN, 1 Dec 2008
    #4

Distribuie pagina asta