If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Answers on a postcard...

本贴由 stevepurves2012-06-22 发布. 版块名称: Miniature Railways

  1. stevepurves

    stevepurves New Member

    注册日期:
    2011-04-13
    帖子:
    198
    支持:
    17
    性别:
    所在地:
    Melton Mowbray
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Please see:

    7.25 GAUGE 7 1/4 INCH LIVE STEAM 2-6-0 LOCO & TENDER + TRACK READY TO RUN!! | eBay

    Favourite Quotes:

    "tender being slightly over-scale"

    "Only slight issues I have found - the front pony wheel set needs aligning properly & the pressure gauge is registering 30 PSI even when cold"

    "but would probably benefit from some fresh paint"
     
  2. richards

    richards Part of the furniture

    注册日期:
    2008-10-01
    帖子:
    4,714
    支持:
    2,099
    性别:
    所在地:
    London
    Heritage Railway Volunteer:
    No I do not currently volunteer
    SLIGHTLY out of scale??? Are the lamps right for an out of gauge load?

    Richard
     
  3. ADB968008

    ADB968008 Guest

    If carlsberg made steam engines it wouldn't look like this..
     
  4. JAmieNWR

    JAmieNWR New Member

    注册日期:
    2006-06-27
    帖子:
    186
    支持:
    0
    I Quote "This auction is for a stunning 7.25 inch / 7 1/4 gauge live steam 2-6-0 loco, its tender and 5 X 2 metres of welded 7.25 gauge track."
    It's made me speachless Im ust admit but stunning it isn't (in my eyes)
     
  5. richards

    richards Part of the furniture

    注册日期:
    2008-10-01
    帖子:
    4,714
    支持:
    2,099
    性别:
    所在地:
    London
    Heritage Railway Volunteer:
    No I do not currently volunteer
    "Stunning (adjective): Causing or capable of causing emotional shock or loss of consciousness."

    Sounds about right to me.

    Richard
     
  6. Reading General

    Reading General Part of the furniture

    注册日期:
    2011-05-18
    帖子:
    6,081
    支持:
    2,217
    has more of a Princess Royal look about it... paint it red , add a leading bogie and rebuild the cab as its too small and it would look better. (Oh and lose that tender of course...I'm still stunned by it)
     
  7. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    注册日期:
    2005-09-11
    帖子:
    36,569
    支持:
    9,984
    性别:
    职业:
    Retired-ish, Part time rail tour steward.
    所在地:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What worries me is, apart from the 205psi... "all the loco would need is an axle pump or injector to gain a boiler certificate."
    Am I missing something or does this mean at present you fill the boiler, close filling hole, and then raise steam and run until boiler gets low...:eek:
     
  8. Shoddy127

    Shoddy127 Well-Known Member

    注册日期:
    2005-06-01
    帖子:
    1,905
    支持:
    330
    性别:
    所在地:
    Portsmouth
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Errrrrrrrrrrrrrrrrgh! Thinking the real 44871 owner's and associated party would be horrified to see the comparison with that "thing".......
     
  9. burnettsj

    burnettsj Member

    注册日期:
    2006-03-22
    帖子:
    208
    支持:
    21
    性别:
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Think it does mention a hand pump being fitted.
     
  10. oddsocks

    oddsocks Well-Known Member

    注册日期:
    2009-11-22
    帖子:
    1,813
    支持:
    289
    性别:
    职业:
    Retired / Dodging a Coffin for as long as I can.
    所在地:
    Half a mile east of Snells Nook Halt. (1883-1931)
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Was it designed by a committee?:argue:
     
  11. kscanes

    kscanes Resident of Nat Pres

    注册日期:
    2008-01-01
    帖子:
    9,284
    支持:
    4,496
    I see someone thought it had enough potential to pay just over £1000 for it.
     
  12. 61624

    61624 Part of the furniture

    注册日期:
    2006-09-27
    帖子:
    5,294
    支持:
    3,599
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    What worries me is, apart from the 205psi... "all the loco would need is an axle pump or injector to gain a boiler certificate."
    Am I missing something or does this mean at present you fill the boiler, close filling hole, and then raise steam and run until boiler gets low...


    You are indeed missing something. As the description says, it has a hand pump, but to get a boiler certificate it needs two independent methods of putting water into the boiler.
     
  13. Sidmouth

    Sidmouth Resident of Nat Pres Staff Member Moderator

    注册日期:
    2005-09-12
    帖子:
    10,176
    支持:
    9,840
    性别:
    所在地:
    Alderan !
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    someone parted with over a grand for it !
     
  14. guard_jamie

    guard_jamie Part of the furniture

    注册日期:
    2008-07-07
    帖子:
    2,503
    支持:
    27
    性别:
    职业:
    Signalman
    所在地:
    Herefordshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The tender genuinely made me laugh. Looks like someone had a dreadful accident with a photocopier, the enlarger button, and designs for an A3 and the 5AT.
     
  15. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    注册日期:
    2006-04-15
    帖子:
    16,552
    支持:
    7,905
    所在地:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I gather that the designer was later savaged to death by his guide dog ...
     
  16. Sheff

    Sheff Resident of Nat Pres

    注册日期:
    2006-04-21
    帖子:
    8,085
    支持:
    3,148
    性别:
    职业:
    Retired Engineer & Heritage Volunteer
    所在地:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'll say it's stunning - the only loco I've ever seen that needs tazering!

    I'd keep the hand pump and turn the whole thing into a novelty bar - the tender looks like it accommodate plenty of ale ;)
     

分享此页面