If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Patterns for O&K clacks

Dieses Thema im Forum 'Narrow Gauge Railways' wurde von pjm gestartet, 10 April 2012.

  1. pjm

    pjm New Member

    Registriert seit:
    10 Dezember 2007
    Beiträge:
    183
    Zustimmungen:
    19
    Geschlecht:
    männlich
    Beruf:
    Train Planner, Network Rail
    Ort:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Hi All,
    Does anyone know of it anyone in the UK has any patterns for parts for O&K clacks. Used on lots of the 2ft locos.

    cheers

    PJM

    Also anyone know of a data base for narrow gauge patterns
     
    pjm, 10 April 2012
    #1
  2. Locomotion

    Locomotion New Member

    Registriert seit:
    7 Juni 2011
    Beiträge:
    40
    Zustimmungen:
    1
    Have you tryed Statfold they have a number of O&Ks
     
    Locomotion, 11 April 2012
    #2
  3. ghost

    ghost Part of the furniture

    Registriert seit:
    29 Mai 2006
    Beiträge:
    4.342
    Zustimmungen:
    5.853
    Geschlecht:
    männlich
    Ort:
    N.Ireland
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You could also try the RPSI at Whitehead - they restored O&K No3 for the DCDR and are currently finishing O&K No1 - not sure what parts were missing or whether they would be compatible with NG locos, but it's worth giving them a shout as they have their own foundry and may be cheaper than commercial casting companies.


    Regards,

    Keith
     
    ghost, 13 April 2012
    #3
  4. lynbarn

    lynbarn Well-Known Member

    Registriert seit:
    22 August 2006
    Beiträge:
    1.683
    Zustimmungen:
    599
    Geschlecht:
    männlich
    Beruf:
    Retired
    Ort:
    Kent
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Also try the Leighton Buzzard Railway most of there locos are O&K so they must know where to get spares or replacements

    Regards

    Colin
     
    lynbarn, 15 April 2012
    #4
  5. lynbarn

    lynbarn Well-Known Member

    Registriert seit:
    22 August 2006
    Beiträge:
    1.683
    Zustimmungen:
    599
    Geschlecht:
    männlich
    Beruf:
    Retired
    Ort:
    Kent
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I was going to say try the Leighton Buzzard Railway as they have the most O&K locos I know, but I see you are from that railway anyway, any one going to Java as they may have a few spare.

    Failing that do you have any drawings?

    Regards

    Colin
     
    lynbarn, 15 April 2012
    #5
  6. 1912O&K

    1912O&K New Member

    Registriert seit:
    5 Juni 2012
    Beiträge:
    2
    Zustimmungen:
    0
    Geschlecht:
    männlich
    Beruf:
    Engineer, driver, fireman, guard, station master
    Ort:
    Devon
    I am involved in restoring a 1912 2ft gauge O&K, in fact we're nearly finished! We had two new clacks cast using the original valve as a pattern. This of course means they are both RHS, but to fit on the LHS of boiler it only needs a slightly longer pipe to the injector. Let me know if the original is usefull to you as a pattern (it is cracked which is why we didn't use it on the loco). I can send you a photo if that would be helpfull.

    Cheers Dave
     
    1912O&K, 5 Juni 2012
    #6
  7. 1912O&K

    1912O&K New Member

    Registriert seit:
    5 Juni 2012
    Beiträge:
    2
    Zustimmungen:
    0
    Geschlecht:
    männlich
    Beruf:
    Engineer, driver, fireman, guard, station master
    Ort:
    Devon
    An update re clack valves - the originals are in fact single handed i.e. the same casting on both sides, so the feed pipe is longer on the LHS.

    Our O&K 5744 1912 2ft 0-4-0 WT is now in service and running very well. Worth the 7 years restoration! We managed to keep in excess of 80% original parts including the boiler which needed very little work. Please get in touch if you need information on restoring a similar loco.
    Dave

    Have been trying to upload photos of the clack valves but "An error has occurred". Give me a steam loco over a PC any day!
     
    1912O&K, 21 September 2013
    #7
  8. pjm

    pjm New Member

    Registriert seit:
    10 Dezember 2007
    Beiträge:
    183
    Zustimmungen:
    19
    Geschlecht:
    männlich
    Beruf:
    Train Planner, Network Rail
    Ort:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Glad to hear that it is working, look forward toseeingitinaction
     
    pjm, 26 September 2013
    #8

Die Seite empfehlen