If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Restoring Wagon Plates

本贴由 samtrains2014-05-07 发布. 版块名称: Heritage Rolling Stock

  1. samtrains

    samtrains New Member

    注册日期:
    2011-04-06
    帖子:
    1
    支持:
    0
    Can anyone please give me some advice for restoring some BR Wagon Plates.
     
  2. StoneRoad

    StoneRoad Member

    注册日期:
    2009-10-29
    帖子:
    979
    支持:
    389
    职业:
    Restoration of heritage items, mainly in timber.
    所在地:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    .
     
  3. pmh_74

    pmh_74 Part of the furniture

    注册日期:
    2009-01-28
    帖子:
    2,444
    支持:
    1,751
    Wire brush and paint, what more do you need to know?
     
  4. StoneRoad

    StoneRoad Member

    注册日期:
    2009-10-29
    帖子:
    979
    支持:
    389
    职业:
    Restoration of heritage items, mainly in timber.
    所在地:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If you want to repair them, that is a different situation.
    Other wise, clean off the old finish and repaint - you may need a steady hand !
     
  5. pmh_74

    pmh_74 Part of the furniture

    注册日期:
    2009-01-28
    帖子:
    2,444
    支持:
    1,751
    I have successfully araldited a plate which was cracked in two back together, though only to use as a pattern for producing a replica.

    On the other hand I have a plate (off one of my vehicles) which someone has welded back together. It is a mess, and not suitable for anything at all; its only use is to confirm the build date.

    As well as the wire brush you may need a small screwdriver or similar for getting into the tricky corners.

    You don't need a particularly steady hand either, as the lettering is raised so quite easy to pick out in a different colour.
     

分享此页面