If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Restoring Wagon Plates

Dieses Thema im Forum 'Heritage Rolling Stock' wurde von samtrains gestartet, 7 Mai 2014.

  1. samtrains

    samtrains New Member

    Registriert seit:
    6 April 2011
    Beiträge:
    1
    Zustimmungen:
    0
    Can anyone please give me some advice for restoring some BR Wagon Plates.
     
    samtrains, 7 Mai 2014
    #1
  2. StoneRoad

    StoneRoad Member

    Registriert seit:
    29 Oktober 2009
    Beiträge:
    979
    Zustimmungen:
    389
    Beruf:
    Restoration of heritage items, mainly in timber.
    Ort:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    .
     
    StoneRoad, 7 Mai 2014
    #2
  3. pmh_74

    pmh_74 Part of the furniture

    Registriert seit:
    28 Januar 2009
    Beiträge:
    2.444
    Zustimmungen:
    1.751
    Wire brush and paint, what more do you need to know?
     
    pmh_74, 8 Mai 2014
    #3
  4. StoneRoad

    StoneRoad Member

    Registriert seit:
    29 Oktober 2009
    Beiträge:
    979
    Zustimmungen:
    389
    Beruf:
    Restoration of heritage items, mainly in timber.
    Ort:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If you want to repair them, that is a different situation.
    Other wise, clean off the old finish and repaint - you may need a steady hand !
     
    StoneRoad, 8 Mai 2014
    #4
  5. pmh_74

    pmh_74 Part of the furniture

    Registriert seit:
    28 Januar 2009
    Beiträge:
    2.444
    Zustimmungen:
    1.751
    I have successfully araldited a plate which was cracked in two back together, though only to use as a pattern for producing a replica.

    On the other hand I have a plate (off one of my vehicles) which someone has welded back together. It is a mess, and not suitable for anything at all; its only use is to confirm the build date.

    As well as the wire brush you may need a small screwdriver or similar for getting into the tricky corners.

    You don't need a particularly steady hand either, as the lettering is raised so quite easy to pick out in a different colour.
     
    pmh_74, 9 Mai 2014
    #5

Die Seite empfehlen