If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Loco Minimum Radius

Discussion in 'Steam Traction' started by matt41312, May 10, 2012.

  1. matt41312

    matt41312 Member

    Joined:
    May 30, 2006
    Messages:
    271
    Likes Received:
    11
    Location:
    Sussex
    Hi,

    Does anyone know where I can find the minimum radius curve a steam loco can travel round?

    I have managed to find the radius for the Standard classes, but I would like to know about things like Bulleid 4-6-2s, SR 4-6-0s/4-4-0s, GWR 0-6-2Ts and 2-8-0Ts, LMS 2-8-0s/4-6-0s, LNER & LMS 4-6-2s plus any smaller tank locos that may have longer wheelbases; E4, N2, N7 etc.

    Thanks

    Matt
     
  2. baldric

    baldric Member

    Joined:
    Jan 28, 2008
    Messages:
    312
    Likes Received:
    50
    For the GWR ones I think it is on some of the outline drawings in books, try the "locos of the royal road" or other similar books that have these. If I remember correctly the information is there for some but not all classes. The drawings are like these, GW Drawings but they have more information bellow such as grate area etc.
     
  3. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    From the GWR diagrams Baldric refers to the 5600 figures are 5 chains normal and 4.5 chains slow. For the 4200 class the figures are 6 chains normal and 5 chains slow.

    By way of contrast the 1361s specifically built for confined areas could negotiate curves with a radius as small as 2 chains!
     
  4. TonyMay

    TonyMay Member

    Joined:
    Feb 2, 2010
    Messages:
    559
    Likes Received:
    76
    whatever it is you haven't got space to model it in 00 scale!
     
  5. matt41312

    matt41312 Member

    Joined:
    May 30, 2006
    Messages:
    271
    Likes Received:
    11
    Location:
    Sussex
    Guys,

    Thanks for all the information. It is really useful and believe me, this is no 00 scale layout we are plotting here. We are redesigning our yard for the future and want to ensure we can fit almost anything into it!

    Does the 4200 class require the biggest radius curve or is there anything else out there we should take into account?

    Matt
     
  6. 1472

    1472 Well-Known Member

    Joined:
    Aug 26, 2008
    Messages:
    1,898
    Likes Received:
    2,517
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Can't answer for the other regions/companies but for the GW locos there are drawings showing the additional clearance at key points on the loco required on curved track (several radii figs quoted). Clearly these figs are also important if you are running on curved track with adjacent structures etc. These drawings are/were held in the BR(W) Civil Engineering Offices.
    From memory GW 2 cyl 4-6-0s generally need 7 chains or 5 chains dead slow - probably the most demanding would be a 72xx but I have no figures for these.
     
  7. baldric

    baldric Member

    Joined:
    Jan 28, 2008
    Messages:
    312
    Likes Received:
    50
    The 72xx can go round the same curves as a 42xx.

    If there are buildings or platforms you need to worry about the overhang on coarches etc, particualrly GWR saloons or very long vehicles such as the 70ft railmotor and autocoaches.
     
  8. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We have had a curve radius issue at Newbridge on the NYMR recently.
    Hopefully now sorted by uplifting the track demolishing about 10m of the loco pit and realigning the track to give approx 6.5 ch radius.
    However some further comments have come to life in that whilst a loco can traverse minimum rad curves it can be a different matter if they are likely to be stored there for any length of time.
    That will also need to be considered.
     
  9. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    No mention of gauge widening in all the above. Are the figures quoted without any widening or is widening automatically added on sharp curves?
     
  10. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Only possible if using timber sleepers.

    However as stated in the PWI Handbook 4th ed 1971
    10 - 7 chain radius = 1/4"
    7 - 5 1/2 ch = 1/2"
    under 5 1/2ch = 3/4"

    These figures would not normally be added on unless authorised by the Civil Engineer.
     
  11. gwr4090

    gwr4090 Part of the furniture

    Joined:
    Aug 8, 2005
    Messages:
    2,847
    Likes Received:
    222
    Gender:
    Male
    Occupation:
    Scientist (Rtd)
    Location:
    Dorset
    The King requires a minimum of 8 chains.
     
  12. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Going to be at least that for a 47xx ? or a P2 !
     
  13. baldric

    baldric Member

    Joined:
    Jan 28, 2008
    Messages:
    312
    Likes Received:
    50
    The 47xx may not as it has a lot of movement in the rear axle, if I get a chance I will see if I can find out later.
     
  14. DR73202

    DR73202 New Member

    Joined:
    Feb 14, 2009
    Messages:
    42
    Likes Received:
    40
  15. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    All the inside framed GWR 4-6-0s were shown in the diagrams as 8 chains normal 7 chains slow as were the 4700s , though if I recall correctly the 4700s were more restricted as to the routes they were allowed on, presumably due to clearance of the outside cylinders with the longer wheelbase.
     
  16. TenWheeler

    TenWheeler New Member Account Suspended

    Joined:
    Jul 10, 2011
    Messages:
    149
    Likes Received:
    4
    Those are the engine diagrams. The purpose of which was to communicate the basic data of the locomotives between departments. Particularly between the mechanical engineers and the civil engineers, as well as management. One of these would be produced even before detail design work was commenced. In fact there are many engine diagrams in existence which were never built. They were also the scene on which the battles took place over route availability. Some of the data can be taken with a pinch of salt. Especially axle loadings. I know of several examples of the axle weight of the actual loco exceeding the ED handsomely - by several tons in some cases. The minimum radius is usually okay, though occasionally a little optimistic.
     
  17. matt41312

    matt41312 Member

    Joined:
    May 30, 2006
    Messages:
    271
    Likes Received:
    11
    Location:
    Sussex
    Guys,
    Thanks for all the advice. Most useful.
    Matt
     

Share This Page