If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Loco Conversions, from 1 Class to Another

本贴由 irwellsteam2011-11-04 发布. 版块名称: Steam Traction

  1. irwellsteam

    irwellsteam Member

    注册日期:
    2011-01-05
    帖子:
    796
    支持:
    176
    职业:
    -
    所在地:
    -
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I got wondering, had no 76XXX standard 4MT locos been preserved, there's probably a fair chance one of the 15 extant 80XXX standard 4MT locos would be in line for a conversion, by removing the tanks and bogie, building a tender and cutting off the bunker and frame plates beneath. Mechanically, would the two classes be near enough mechanically identical, for the purists sake, once you had done this?
    Being standard, am i right to assume the boiler is the same design?
    What about the wheels though? Although with this conversion process, you would end up with a similar looking mogul engine, how big is the difference in the wheel sets used? And if so, what work would need doing to the frames of the converted 80XXX to accomodate smaller wheel sets?

    Does anybody know the current whereabouts and status of 44901? What say we get hold of her and make her into one of these brutes! :rockon:
    http://www.6g.nwrail.org.uk/fourfoursixeightsixasidecarrshed.jpg
     
  2. std tank

    std tank Part of the furniture

    注册日期:
    2005-09-20
    帖子:
    3,942
    支持:
    1,076
    性别:
    职业:
    Retired
    所在地:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The answer to your first question would be to build a new loco, but re-use the pony truck and coupled wheel axle boxes. Sorry to be so negative.
    44901 is still at Barry.
     
  3. kieranhardy

    kieranhardy Well-Known Member

    注册日期:
    2006-06-08
    帖子:
    1,603
    支持:
    870
    性别:
    所在地:
    Kidderminster
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Didn't the 76xxx have a different type of boiler?

    According to Wiki (yes i know!) it was the 75xxx standard that was the tender version of the tank, not the Mogul.

    Quoted from the 4-6-0's WIki page:

    'They were essentially a tender version of the standard 4 2-6-4T, with similar characteristics to the GWR Manor Class, though unlike the Manors they were built to the universal loading gauge. They used the same running gear as the tank engine (with the leading bogie from the Standard Class 5), and substantially the same firebox, smokebox and boiler, although the boiler barrel was increased in length by 9 inches '

    http://en.wikipedia.org/wiki/BR_standard_class_4_4-6-0

    To me the boiler of the Mogul always looked smaller to the one carried by the other two 4MT types?
     
  4. Jimc

    Jimc Part of the furniture

    注册日期:
    2005-09-08
    帖子:
    4,117
    支持:
    4,821
    职业:
    Once computers, now part time writer I suppose.
    所在地:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I think the idea falls because Riddles never really quite grasped the concept of standardisation - at least across classes...
     
  5. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    注册日期:
    2006-04-15
    帖子:
    16,552
    支持:
    7,905
    所在地:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Although to be fair on Riddles; 2 of the 3 classes quotes were basically updates of the equivalent LMS Ivatt / Fairburn classes, only the 4mt 4-6-0 was a new design, which should maybe have made use of more standard components ... or not been built at all ...
     

分享此页面