If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Swanage Railway General Discussion

Discussion in 'Heritage Railways & Centres in the UK' started by Rumpole, Oct 10, 2012.

  1. Gladiator 5076

    Gladiator 5076 Part of the furniture

    Joined:
    Oct 2, 2015
    Messages:
    6,077
    Likes Received:
    4,890
    Gender:
    Male
    Location:
    Swanage
    Heritage Railway Volunteer:
    No I do not currently volunteer
    One of the crane's has appeared in Swanage so I am guessing the work on New Barn Bridge may be imminent.
     

    Attached Files:

  2. Gladiator 5076

    Gladiator 5076 Part of the furniture

    Joined:
    Oct 2, 2015
    Messages:
    6,077
    Likes Received:
    4,890
    Gender:
    Male
    Location:
    Swanage
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Noticed this on Friday at Norden Gates on the way to some nice lady sticking a needle in my arm.
    I think it is new (I do not have a picture to hand but there may have been an old one there before) and it is also slightly at divergence with the gradient profile I have for the line which the railway published in a gala programme.
     

    Attached Files:

  3. biggles200

    biggles200 Member

    Joined:
    Jul 2, 2007
    Messages:
    328
    Likes Received:
    237
    Occupation:
    retired and holding on
    Location:
    Purbeck
    Heritage Railway Volunteer:
    No I do not currently volunteer
  4. bishdunster

    bishdunster New Member

    Joined:
    Sep 27, 2015
    Messages:
    134
    Likes Received:
    103
    Gender:
    Male
    Occupation:
    Retired, but still far too busy !
    Location:
    dunster somerset
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I believe that the work to replace the waybeams at New Barn bridge is due to take place today, hard to believe that i was at the controls of the same crane(FBC1) replacing cross girders ans installing the new waybeams 36 years ago! Hope the gang out there today take a moment to spare a thought for us pioneers from those early days, especially those who are sadly no longer with us . Wish i was with you all there today and at the controls of FBC1 again, Cheers all, Bish.
     
    Mogul, David R, free2grice and 4 others like this.
  5. Young Philip

    Young Philip New Member

    Joined:
    Mar 1, 2012
    Messages:
    16
    Likes Received:
    5
    Thank you Colin. I too was on that train, what a memory! I will never forget the look on the faces of passengers waiting at Earlsfield as went past on the fast line. They had seen Clan Line 4 to 5 minutes before and then this train following. Total astonishment!
     
  6. ady

    ady Well-Known Member

    Joined:
    Jul 4, 2006
    Messages:
    2,369
    Likes Received:
    281
    Gender:
    Male
    Occupation:
    Post office
    Location:
    South
    Heritage Railway Volunteer:
    No I do not currently volunteer
    maybe what you hoped for?

    Which platforms at Waterloo are they at?
     
    Last edited: Feb 23, 2021
    andalfi1 likes this.
  7. Woof Mk2

    Woof Mk2 Member

    Joined:
    Oct 26, 2015
    Messages:
    287
    Likes Received:
    218
    Gender:
    Male
    Location:
    Padstow
    Heritage Railway Volunteer:
    No I do not currently volunteer
    And if I recall lunch at the Square on the odd occasion.....
    2/3 pile out of the front of an ex PO van and grockles heard to say "OMG they let workman here"....with that 4/5 get out of the back.....Happy days
     
    Dunfanaghy Road likes this.
  8. Young Philip

    Young Philip New Member

    Joined:
    Mar 1, 2012
    Messages:
    16
    Likes Received:
    5
    Platforms 14 & 15
     
    ady likes this.
  9. Gladiator 5076

    Gladiator 5076 Part of the furniture

    Joined:
    Oct 2, 2015
    Messages:
    6,077
    Likes Received:
    4,890
    Gender:
    Male
    Location:
    Swanage
    Heritage Railway Volunteer:
    No I do not currently volunteer
    My dad took this one of the U from the bridge yesterday. Interesting initials on the gauge.
    IMG_7104.jpg
     
    30854 and Bluenosejohn like this.
  10. 5944

    5944 Resident of Nat Pres

    Joined:
    Jan 14, 2006
    Messages:
    8,031
    Likes Received:
    7,605
    Gender:
    Male
    Occupation:
    Train Maintainer for GTR at Hornsey
    Location:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Well it looks like a GWR loco at the moment with absolutely no protection from the elements for the crew... ;)
     
  11. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,101
    Likes Received:
    57,418
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    From the way the gauge cocks are set, I am guessing it is a hydraulic pressure gauge.

    Tom
     
    Mogul likes this.
  12. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Well I hope they aren't planning to steam it at that sort of pressure.:)
     
  13. ruddingtonrsh56

    ruddingtonrsh56 Member

    Joined:
    Sep 14, 2009
    Messages:
    979
    Likes Received:
    1,470
    Gender:
    Male
    Location:
    Nottinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Something that's just occurred to me and I'm curious to know the answer to - I have it in my head that the U is right hand drive but that some Us were built left hand drive, and the same was true for the Ns (no idea where I got this idea from so could be nonsense) - is the N the 'correct' hand drive for an easy boiler swap onto the U? Or if it wasn't, how complicated is it to convert a boiler regulator from right hand drive to left hand drive (or vice versa?)
     
  14. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,101
    Likes Received:
    57,418
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Six times the working pressure plus 5psi isn't it? ;)

    Tom
     
    ghost likes this.
  15. Mogul

    Mogul Member

    Joined:
    Feb 2, 2016
    Messages:
    324
    Likes Received:
    687
    Gender:
    Male
    Location:
    Dorset
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    True
    True
    True
    Cant remember either but I think the earlier SECR batches were RHD and later SR ones LHD
    N 31874 is also RHD
    The boiler is the same. They are symmetrical. The regulator is double handled so can be worked from both sides of the cab. Not sure if they go the other way on a LHD. Maybe someone from the Bluebell can tell us. RHD U goes anti-clock to open.
     
    Last edited: Feb 24, 2021
  16. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,101
    Likes Received:
    57,418
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's a good question, I've never thought about it before. On the Bluebell, 1638 is RHD and 1638 is LHD.

    AFAIK, on the LHD locos, the regulator opens clockwise, i.e. lift to open. That means the regulator linkage must be reversed inside the boiler, but I've never seen inside to look closely.

    A couple of photos:

    RHD
    https://commons.wikimedia.org/wiki/File:SR_U-Class_at_Horstead_Keynes_(cab)_(9131804004).jpg

    LHD
    https://davidheyscollection-static.myshopblocks.com/images/cm/27efd080ae49e28d088de953906e04d8.jpg

    There are a couple of obvious differences on those boilers: notably that the steam heat control valve is on the fireman's side and the blower on the driver's side - so they swap over on the two boilers. They come through boiler mountings on the same side, but if you wanted to swap a boiler from RHD to LHD, you would have a bit of internal rearrangement to do within the same basic physical structure.

    (Incidentally, as a bit of an aside - the Q class is LHD, but the tender currently with No. 541 is originally from an RHD loco - so the handbrake is on the wrong side, i.e. it is on the driver's side).

    Tom
     
  17. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Swapping the linkage in the dome to work the valve in the opposite direction is easy. The additional problem will be with the regulator handle which on these locos is handed.
     
  18. goldfish

    goldfish Nat Pres stalwart

    Joined:
    Jan 13, 2009
    Messages:
    14,900
    Likes Received:
    12,241
    Ambidextrous?

    Simon
     
  19. torgormaig

    torgormaig Part of the furniture Friend

    Joined:
    Jul 17, 2007
    Messages:
    4,440
    Likes Received:
    6,546
    I hate to correct you Tom but I'm sure that both 1618 and 1638 are RHD. Indeed as far as I know all the Us were RHD as were all the Ns except for the last few of the final batch, Nos 1400 - 1414. Of these , certainly 1400 to 1405 were RHD and at least 1408 to 1414 were LHD. With quite regular tender swaps over the years on the Southern it was quite common for locos to receive wrong handed tenders as you have with 541.

    That's my understanding, but I'm happy to be corrected

    Peter
     
    Jamessquared likes this.
  20. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,101
    Likes Received:
    57,418
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I think you're right - for some reason I had it in my mind that they were opposite ways round, but looking at photos of 1618 (a loco I last saw about 500 years ago, it seems :( ...) the reverser reach rod is on the right hand side. Mea culpa.

    Tom
     

Share This Page