If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Lynton and Barnstaple - Operations and Development

Discussion in 'Narrow Gauge Railways' started by 50044 Exeter, Dec 25, 2009.

  1. RailWest

    RailWest Part of the furniture

    Joined:
    Dec 7, 2011
    Messages:
    3,805
    Likes Received:
    7,445
    Gender:
    Male
    Location:
    West Country
    >>>In general, as you may already be aware the Lower Quadrant signals were more common originally....

    For a long time LQ signals were the only type of semaphore signals in the UK (other than some 'cross bar' shunt signals which rotated horixontally). Apart from a brief experiment with 3-position signals, which were done as UQ to follow their American origin, UQ signals were not adopted until that experiment ended (to avoid any confusion) in the late 1920s. Even then many LQ arms remained in use well into the 1960s.

    >>>With Lower Quadrant signals they require extra balance weights at the signal post in order to ensure the signal arm lifts back up to to the horizontal position in the event of a wire failure.

    Sorry, but I must disagree with that fallacy. It was a BoT requirement that LQ arms had to be able to return to danger under their own weight (hence the heavy spectacle plate casting). After all, what else would have happened if the down-rod between the arm and the weight lever broke? The weight lever did help of course to bring the arm back to danger more quickly, but its primary purpose was/is to pull in the slack in the signal-wire once the lever in the signal-box frame has been replaced.
     
    Last edited: Dec 8, 2020
    34015 and pmh_74 like this.
  2. RailWest

    RailWest Part of the furniture

    Joined:
    Dec 7, 2011
    Messages:
    3,805
    Likes Received:
    7,445
    Gender:
    Male
    Location:
    West Country
    I'm not sure that I understand the question ;-) Are you talking about the original 1898-1935 railway or the current-day line?

    If the former, then all L&BR signals were always lower-quadrant with the sole exception of the Up Home at Woody Bay, which was renewed by the SR in 1934 in the new contemporary standard of upper-quadrant arms.

    If the latter, then the answer is simply that the initial restoration at Woody Bay used whatever was available - in this case an UQ arm if I recall for the Down Home - until such time as the correct LQ arm could be sourced.
     
    Wenlock likes this.
  3. Wenlock

    Wenlock Well-Known Member Friend

    Joined:
    Oct 26, 2008
    Messages:
    2,027
    Likes Received:
    1,319
    Gender:
    Male
    Occupation:
    Bus Driver
    Location:
    Loughton Essex
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    [/QUOTE]

    I hear what you say, but surely making an extra heavy casting for what could otherwise be a lightweight spectacle plate is 'adding extra balance weights'

    After all, even UQ signals need some balance weights to overcome the drag of the wire run.
     
  4. Mark Thompson

    Mark Thompson Well-Known Member

    Joined:
    Sep 10, 2017
    Messages:
    1,430
    Likes Received:
    3,563
    Gender:
    Male
    Location:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    This is starting to remind me of:
     
  5. RailWest

    RailWest Part of the furniture

    Joined:
    Dec 7, 2011
    Messages:
    3,805
    Likes Received:
    7,445
    Gender:
    Male
    Location:
    West Country
    With respect, but the weights on a weight lever have nothing to do with 'balance'. The purpose of the weight lever is to pull in the signal wire slack and therefore must be weighted accordingly.

    If the down-rod broke on an UQ arm then the arm would return to danger, but there would be nothing to pull in the wire without the weights on the weight lever, same with a LQ arm. So there are no 'extra' weights on the weight lever, just the amount necessary to do its job.

    With a LQ arm, clearly there must be more weight to the right of the pivot than to the left, in order for the arm to return to danger by itself. Therefore whatever exists to the right of the pivot (which is usually the spectacle casting) must be made heavy enough to fulfil that purpose. Again it is not 'extra' weight, simply the weight needed to fulfil the requirement.
     
    Wenlock, pmh_74 and Axe +1 like this.
  6. Biermeister

    Biermeister Member

    Joined:
    Aug 4, 2019
    Messages:
    333
    Likes Received:
    625
    Gender:
    Male
    Occupation:
    Brewer
    Location:
    Daylesford, Victoria, Australia
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Glad that we've got up and down sorted out (not)! Now that we are in the twenty-first century perhaps it is time to consign it all to history. As far as the L&BR is concerned surely all we need is Barnstaple direction or Lynton direction? Signalling buffs might well continue as consenting adults of course, but ordinary mortals will undoubtedly prefer to know where they are going!
     
    bantamd14 likes this.
  7. Dag Bonnedal

    Dag Bonnedal New Member

    Joined:
    Mar 28, 2012
    Messages:
    183
    Likes Received:
    316
    Gender:
    Male
    Location:
    Stockholm, Sweden
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    In Sweden lower quadrant signals were banned 100 years ago. This because the risk of ice on the wing rendering the counter weight insufficient.
    But the term "lowering the signal" has remained as an unofficial term used as long as we had semaphore signals, i.e. still on preserved railways.
     
    Mark Thompson and ilvaporista like this.
  8. pmh_74

    pmh_74 Well-Known Member

    Joined:
    Jan 28, 2009
    Messages:
    2,217
    Likes Received:
    1,457
    As a point of order, ‘ordinary mortals’ have always had things like timetables and signposts and destination boards to tell them where they are going. Signalling ‘buffs’ can do what they like but the railway itself needs some kind of official designation as these are used not just on signal box diagrams but in all sorts of paperwork. You can call the two directions whatever you like but there does need to be some sort of official name for them.

    Before we get back on topic... which current UK railway doesn’t use ‘up’ and ‘down’ at all?


    Sent from my iPhone using Tapatalk
     
    MellishR likes this.
  9. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,069
    Likes Received:
    5,165
    Before we finally leave the discussion of signals: why do we call them upper or lower quadrant, rather than octant, considering that they move by only about 45°?
     
  10. Mark Thompson

    Mark Thompson Well-Known Member

    Joined:
    Sep 10, 2017
    Messages:
    1,430
    Likes Received:
    3,563
    Gender:
    Male
    Location:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Like slotted post signals were banned here for a similar reason. Snow could get packed in the slot, preventing movement.
    Does anyone recall which accident was caused by this?
     
    johnofwessex likes this.
  11. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,106
    Likes Received:
    57,439
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Possibly because I’m days past they moved over a much larger arc (think of a GNR somersault signal, or a slotted post, where the signal is more or less vertical when off.
    @RailWest wil know better, but I think in the very early days of signalling there were time installations that used horizontal for danger; 45 degrees down for caution s as me fully down (and hidden) for proceed - that would have been in time-interval days when, without a signal post, the Bobby would have given similar indications with flags.

    Tom
     
  12. torgormaig

    torgormaig Part of the furniture Friend

    Joined:
    Jul 17, 2007
    Messages:
    4,445
    Likes Received:
    6,548
    Abotts Ripton, 21st Jan. 1876. The up Flying Scotsman ran into the rear of the proceeding coal train which was shunting clear to let it past. Signals had frozen in the clear position as a result of a severe snow storm. A down Leeds express then ran into the wreckage. Thirteen people died.

    Interestingly slotted signals do not seemed to have been banned. They were extensively used by the former North Eastern Railway and survived in use on BR at least until the late 1970s.

    Peter
     
  13. 35B

    35B Nat Pres stalwart

    Joined:
    Jun 18, 2011
    Messages:
    25,496
    Likes Received:
    23,737
    Gender:
    Male
    Location:
    Grantham
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I think the last one went late 1980s/early 1990s - I'm sure I recall seeing it marked in the railway press when I first started taking magazines. On the Skegness line?
     
  14. Mark Thompson

    Mark Thompson Well-Known Member

    Joined:
    Sep 10, 2017
    Messages:
    1,430
    Likes Received:
    3,563
    Gender:
    Male
    Location:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Thanks for that, Peter. Yes there was still a lot of slotted posts around after that. Certainly on the LBSCR well into the 1890s, although the only picture of one in more modern times I can recall, was at the mouth of Newhaven Harbour, and I'm pretty sure that controlled shipping, rather than trains on the West Harbour branch.
     
  15. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,106
    Likes Received:
    57,439
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You’ve sent me scuttling back to the accident report for an afternoon’s reading ...

    https://www.railwaysarchive.co.uk/documents/BoT_AbbottsRipton1876.pdf

    (One of those vast sprawling accidents with lots going on in different places and a whole series of learning points and things being done very differently then than later came to be common).

    Tom
     
  16. weltrol

    weltrol Part of the furniture Friend

    Joined:
    Dec 29, 2008
    Messages:
    2,784
    Likes Received:
    658
    There are a few in preservation. NYMR have several, as do the Aln Valley, so there must be allowances in signalling design protocol
     
  17. Mark Thompson

    Mark Thompson Well-Known Member

    Joined:
    Sep 10, 2017
    Messages:
    1,430
    Likes Received:
    3,563
    Gender:
    Male
    Location:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I've often wished that the Bluebell could have recreated a couple of examples at Sheffield Park, seeing as the period portrayed is the 1880s, I'd just figured that they were no longer legal. Interesting.
    Theres some serious thread drift going on here, though!
     
    35B likes this.
  18. torgormaig

    torgormaig Part of the furniture Friend

    Joined:
    Jul 17, 2007
    Messages:
    4,445
    Likes Received:
    6,548
    I think you might be confusing sumersault signals, as used on the GN, among other railways, with slotted post signals as preferred by the NER. Both survived in use until recent years. This is the ex GNR somersault signal outside the NRM (and now starting to look the worse for wear after 45 years there):- mini_IMG_0481 copy.jpg

    while this is a NER slotted signal in the foyer of York station
    mini_IMG_0012 copy.jpg

    The blurb at it's base tells that it was the up distant signal at Haxby on the Scarborough line and when replaced in 1984 it was the last of its type on a main passenger line.

    Peter
     
  19. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,106
    Likes Received:
    57,439
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I believe the continued use of slotted post signals was because, unlike in very early days, they no longer had an indication in which they were completely hidden within the post (and liable to get frozen in place in bad weather). So by time they disappeared, they were operationally no different from any other LQ semaphore, except the the pivot was within a slot rather than on the face of a solid signal post.

    Tom
     
    Nick C, Bluenosejohn and torgormaig like this.
  20. 35B

    35B Nat Pres stalwart

    Joined:
    Jun 18, 2011
    Messages:
    25,496
    Likes Received:
    23,737
    Gender:
    Male
    Location:
    Grantham
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Correction noted with thanks
     

Share This Page