If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tornado

Discussion in 'Steam Traction' started by Leander's Shovel, Oct 20, 2007.

  1. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Foolish me for underestimating NP's aptitude for pedantry.

    When is it or when is it not LCF? Are we going to have a discussion about musical theory next? When does a rhythm constitute music and when does it not...

    250 odd Revs per mile?

    At 90 Mph a mile is what, 45 seconds?

    504 cycles on the combi lever, for every mile that the valve went from free to stuck?

    How many miles do we reckon that took? 10? 20? 5?

    It takes at least a mile to stop and my understanding is the brakes didn't go on until the Cross head made a bid for freedom after being let down and smacked in the face by one broken/free Combi lever/Union Link.

    So we have a value bounded anywhere from 500 - 5000+ cycles on the combi lever.

    Do please explain to me how that would not constitute fatigue?
     
  2. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    This is getting crazy. One end of the combination lever became immovable, the other end didn't. Result-a combination lever in two pieces.
     
    Sheff, S.A.C. Martin, jnc and 3 others like this.
  3. Enterprise

    Enterprise Part of the furniture

    Joined:
    Sep 9, 2005
    Messages:
    5,275
    Likes Received:
    3,077
    Never mind. I think you're getting the hang of it.
     
    Spinner, Kylchap and jnc like this.
  4. sir gilbert claughton

    sir gilbert claughton Well-Known Member

    Joined:
    Jan 17, 2017
    Messages:
    1,061
    Likes Received:
    511
    Gender:
    Male
    Occupation:
    retired
    Location:
    east sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer

    that's interesting . is that why she (46256) was laid up at the back of 1A in 1959/60 ? was there for about 2 months
     
  5. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Do I come in to your chats and undermine them? Why the hostility?

    Same, why the hostility?
     
  6. 35B

    35B Nat Pres stalwart

    Joined:
    Jun 18, 2011
    Messages:
    25,487
    Likes Received:
    23,719
    Gender:
    Male
    Location:
    Grantham
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It may just be the absolutism of your responses? This outside observer, with no axe to grind about Tornado, and no real understanding of the detailed engineering principles, is thoroughly lost in the discussion of what does or does not constitute "fatigue".
     
    jnc and mdewell like this.
  7. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,164
    I don't understand. Are you suggesting that the combination lever failed because of many cycles of increased stress, caused by the valve becoming stiff but not seizing completely?
     
  8. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The valve eventually became seized, that much we do know.

    Does the valve instantly seize or does it go through a stages of reduced motion? Very difficult to say without actually measuring real time valve travel.

    For every cycle the valve is refusing to sweep across its full range of motion, the combi lever gets progressively more stressed, until the valve seizes completely and the lever is just in pure bending. This is why the bound above is so wide.

    It could be a few cycles (instant stuck valve - pure bending - few tens/hundred cycles - break) or it could be a progressive seize( thousands of smaller stress cycles followed by ever increasing amplitude leading to a break)

    This is what creates the ambiguity of fatigue or not fatigue.

    My point is you cant actually rule out fatigue as a failure mechanism, because you cant actually say when the valve began working at a reduced range of motion.

    Yes this has become a highly technical theoretical discussion, but it makes a change from arguing over shades of black/blue/red/green which is a pointless discussion because everyone knows all locomotives should be battleship grey...
     
    garth manor likes this.
  9. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    All true, but isn't the precise failure mechanism of the combination lever of purely acadamic interest, since the root cause of the failure lies elsewhere and it would be hard and arguably almost pointless to design a combination lever that wouldn't fail in one way or another given a seizure in the valve? Seems to me a lot of the sound and fury is people seeing the words fatigue failure and thinking that implies there was something wrong with the component.
     
    LMS2968, jnc, MarkinDurham and 5 others like this.
  10. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed. An infinitely stiff combi lever is a road to no where.

    As I have said numerous times, the design and manufacture of the combi lever is NOT being critiqued here.

    I would hazard a guess that this aversion to the F word stems from a generation familiar with the Comet which was a failure borne out of poor design. This is not that.

    Perhaps the hostility I'm receiving both passive and directly is in exposing a concept that is clearly unfamiliar to most, that fatigue itself is not always a result of poor design, but can be when a component is placed into a situation beyond its design envelope.
     
  11. Allegheny

    Allegheny Member

    Joined:
    May 8, 2015
    Messages:
    625
    Likes Received:
    308
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    A while ago I read Porta's tribology paper (sad but true).
    He was maintaining that if things got too hot, the lube oil would just evaporate.
    Could this be an issue with the Tornado failure?
     
  12. mdewell

    mdewell Well-Known Member Friend

    Joined:
    Mar 23, 2005
    Messages:
    1,653
    Likes Received:
    2,564
    Occupation:
    UK & Ireland Heritage Railways Webmaster
    Location:
    Ruabon, Wrexham
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'm getting quite fatigued just reading all this. ;)
     
    ragl, Matt37401, MellishR and 3 others like this.
  13. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I suspect there are a number of mechanisms by which the valve could have seized. And one tends to lead to another, since any significant problem is going to lead to excessive heat and problems with the lubrication. I've not been following this closely, but I'm not aware that a complete analysis of the failure mechanism has been published. It needs to be understood that it's not always possible to be confident about the root cause. I have no useful experience with steam engines, but my very limited experience with IC engines is that you may need to be lucky and catch a failure before it becomes catastrophic before you can be absolutely sure what the problem was. Difficult, for example, to detect that an oversize white metal bearing shell was used if the white metal has melted out of the failed bearing.

    [Later] Just been reading the Tornado website fairly carefully. It states that there were four likely contributory factors to the failure, but isn't quite as precise as one might like about what they are. Maybe the for public version wasn't edited down as well as one might like. They suggest out of spec lubricating oil as one, they may be suggesting wear in the drive mech to the lubricator as another (I found the phrasing a bit contradictory), they're hypothesising piston ring fit (they were too damaged to test that theory), but I couldn't figure out what the 4th was. 29/10/2108 update on this page. https://www.a1steam.com/category/news/page/3/ .
     
    Last edited: Feb 6, 2020
    Steve and jnc like this.
  14. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,164
  15. NeilL

    NeilL Well-Known Member

    Joined:
    Mar 30, 2012
    Messages:
    1,916
    Likes Received:
    1,402
    Occupation:
    Retired & OAPWay & tree feller
    Location:
    Staffordshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Can we have a separate thread for 'Tornado Failure' and keep this one for the activity of a wonderful loco.
     
    Sheff, blink bonny, 30854 and 5 others like this.
  16. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Good idea. Then all the "experts" can gather together in one place and argue ad infinitum. :)
     
  17. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer

    Very well said NeilL!:)
     
  18. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer

    Don't worry, there wont be any more contributions from me.
     
  19. Foxhunter

    Foxhunter Member

    Joined:
    Jun 9, 2011
    Messages:
    590
    Likes Received:
    709
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Well, while you lot have been discussing the minutiae of the 'Ebor Flyer' failure, the Trust engineering team have completed a pretty thorough overhaul of the locomotive at the Wensleydale Railway, a plethora of updates have appeared on the A1 website and make interesting reading.

    https://www.a1steam.com/2020/01/25/tornados-winter-overhaul/

    https://www.a1steam.com/2020/02/21/february-news/

    https://www.a1steam.com/2020/02/29/late-february-overhaul-progress/

    https://www.a1steam.com/2020/03/06/early-march-overhaul-update/

    https://www.a1steam.com/2020/03/25/late-march-overhaul-update/

    https://www.a1steam.com/2020/03/30/overhaul-finale-and-move-to-york-for-storage/

    Foxy.
     
    garth manor, ragl, 60017 and 4 others like this.
  20. Richard Roper

    Richard Roper Well-Known Member

    Joined:
    May 22, 2006
    Messages:
    1,310
    Likes Received:
    1,355
    Gender:
    Male
    Occupation:
    Librarian
    Location:
    Just up the road from 56E Sowerby Bridge
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Lots of very interesting reading there! An excellent insight into just how much work goes on to keep a Locomotive in operating condition. An absolute credit to the teamwork and hours spent on the Winter overhaul.

    Richard.
     

Share This Page