If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Narrow Gauge Diesels

Discussion in 'Narrow Gauge Railways' started by MuzTrem, Dec 27, 2019.

  1. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer

    It looks as though the 'bits that matter' ie not the cab might fit
     
  2. CymruGarratt

    CymruGarratt New Member

    Joined:
    Mar 20, 2008
    Messages:
    71
    Likes Received:
    13
    The Russian loco wouldn't represent much of an improvement on a Funkey anyway, at 400 versus 335 b.h.p. Even the SAR Class 91s only represent around 650 b.h.p. I think the FR would be looking for something more substantial than that.
    C
     
  3. Dunfanaghy Road

    Dunfanaghy Road Well-Known Member

    Joined:
    Oct 9, 2019
    Messages:
    1,252
    Likes Received:
    1,566
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Alton, Hants
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    They still have to transmit the power to 2ft gauge wheelsets, and that seems to be the pinch point.
    Pat
     
  4. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    How does the transmission work on the SAR Class 91?

    Its fascinating though that it is far from straightforward to build a diesel that can do the same job as a NGG16
     
  5. DcB

    DcB Well-Known Member

    Joined:
    Jun 5, 2018
    Messages:
    1,338
    Likes Received:
    421
    Location:
    Surrey
    Heritage Railway Volunteer:
    No I do not currently volunteer
    From the Class 91 wikipedia entry
    Maybe how other 600mm gauge diesel electric locos can be built?
     
  6. CymruGarratt

    CymruGarratt New Member

    Joined:
    Mar 20, 2008
    Messages:
    71
    Likes Received:
    13
    This photo from the internet gives some idea of the construction of a Class 91 bogie. The frame is arched between the wheelsets and the traction engines are slung underneath. A neat solution, but I rather think the loco frames would have to be relatively high above rail level which could be an issue when it comes to overall height of the loco. The engine of a future loco using these or similar bogies could be slung in a well between the bogies, which might overcome the problem
    C
     

    Attached Files:

    Goldie and kscanes like this.
  7. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    That explains the 'hose and air filter' between the axles
     
  8. kscanes

    kscanes Resident of Nat Pres

    Joined:
    Jan 1, 2008
    Messages:
    8,402
    Likes Received:
    3,922
    The earliest bogie loco on the Queensland sugar cane railways (first one was in 1972) were built by E M Baldwin (no relation to the American Baldwin), and used axle mounted final drives designed in house. They did experience quite a lot of problems with the final drives, certainly initially. http://www.sa-transport.co.za/trains/sugar_cane_rail/baldwin.html

    Eimco (I assume the mining equipment company) built four 720hp 2ft gauge locos for the sugar company in 1990; I believe they are still in use so were presumably successful. Eimco is not a name that I usually associate with loco building, though reference is made to one being built in Zimbabwe. http://www.sa-transport.co.za/trains/sugar_cane_rail/eimco.html

    Most of the big bogie locos are 500hp ex 3'6" gauge Queensland Railways DH class, originally built by Walkers and rebuilt by them down to 2ft gauge. These are the intriguing ones; did final drives designed for 3'6" gauge fit 2ft gauge wheelsets or were the final drives replaced? http://www.sa-transport.co.za/trains/sugar_cane_rail/gh500.html
     
    Goldie likes this.
  9. Dunfanaghy Road

    Dunfanaghy Road Well-Known Member

    Joined:
    Oct 9, 2019
    Messages:
    1,252
    Likes Received:
    1,566
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Alton, Hants
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Interesting. I hope that FfR/WHR look at these. Silly to reinvent the wheel unless there is no alternative.
    Pat
     
  10. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,164
    Is it not possible to use outside frames, so that the whole of the width between the flanges is available for something? Then put a final drive gearbox there, including a spur gear, with a drive shaft coming down from above the wheels?
     
  11. Dag Bonnedal

    Dag Bonnedal New Member

    Joined:
    Mar 28, 2012
    Messages:
    183
    Likes Received:
    316
    Gender:
    Male
    Location:
    Stockholm, Sweden
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Surprised that these loco have not been up in the discussion before. Superb and rugged design, more than 11 500 locos built to the same basic design and still counting...
    We bought the slightly older design TU4 some years ago, see loco 21 Gaivoron:
    https://www.oslj.nu/sv-SE/fordon/motorlok-41307609
    Also regauged, not only the width between the rails but also narrower cab to 82 inches and reduced height to 10 ft. This is doable for the TU7 as well.
    Specially the bogies are very good, gives the loco a ride like a tourist coach with air suspension but is also capable to negotiate very, very bad track on Russian forest lines.

    I don't think there is anything more suitable as a base for a rebuild/newbuild.

    Added:
    The Russian locos are designed for service in all part of the former Soviet Union, i.e. from deserts with +45 C to Siberian winters with -50 C, that's way more than 100 degree span. In Wales you normally have a max of 30 degree difference between summer and winter. Probably you would be able to increase the power of these locos considerably. All axle gear boxes are the same, giving a great flexibility of how to arrange the propeller shafts and might be possible to design a three bogie, six axle loco. Or, as have been done in Russia, multiple drive. Giving pair locos with 8 axles. Sky is the limit.
    Don't compare them to the Funkeys, the axle gear boxes of those hardly fit between the axles and the rails...
     
    Last edited: Jan 22, 2020
  12. Neil T

    Neil T New Member

    Joined:
    Jan 18, 2020
    Messages:
    3
    Likes Received:
    11
    Gender:
    Male
    Location:
    Aberystwyth
    Heritage Railway Volunteer:
    No I do not currently volunteer
     
  13. Neil T

    Neil T New Member

    Joined:
    Jan 18, 2020
    Messages:
    3
    Likes Received:
    11
    Gender:
    Male
    Location:
    Aberystwyth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I have to agree with Dag Bonnedal , the Russian Ty7 could be uprated in engine power using the same Bernaul V12 engine, the transmission & final drive boxes would be capable of taking this. The adhesive weight would need to increase accordingly but this could be designed alongside any body modifications for a restricted loading gauge, similar to the rebuild by Steve Coulson on the FR Funkey "Vale of Ffestiniog" We do have another Ty7 in store at the BMR, ex Tatra Electric Railway in Slovakia & 1000mm gauge, which would be a good basis for such a project.
     
    lynbarn, Monkey Magic, Goldie and 2 others like this.
  14. James Hewett

    James Hewett New Member

    Joined:
    Aug 19, 2015
    Messages:
    97
    Likes Received:
    488
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Slightly off-topic re recent conversations - but certainly on-topic with this section: over the last few weeks, the Halesworth to Southwold Railway's 9oomm-gauge 1989 4W DH RFS loco RS106 turned its wheels, under power, for the first time after eighteen months' work, and a couple of decades in the rain which meant a great deal of re-wiring and solenoid/valve work. We will be posting a short video of this on the social media.
    This means that the complex drive system - Cummins engine, twin-disc hydraulic drive, turbine brake, gearboxes, cardan shafts, axleboxes et al are all OK - quite a relief! We very much hoped that this was the case - as the hydraulic fluid is both very clean and non-leaky, and the system hand-turned easily - but it was nice to confirm it. Our small but highly-dedicated loco team are to be congratulated. Sadly we had to remove the seized parking brake to get this to happen - but that's the next thing to sort. The team hope to be driving this loco on our workshop test track in spring - the first coach, being built to test loco and train brakes, etc., is under construction as well.
    In case anyone is wondering - yes, the gauge is 14mm too narrow for the HSR - but the extra-wide wheels combined with low-profile "industrial" flanges mean that the back-to-back measurement is fine, and there won't be problems integrating with 914mm (36") stock or pointwork.
    James
     
    ragl, ross, Bluenosejohn and 3 others like this.
  15. fergusmacg

    fergusmacg Resident of Nat Pres

    Joined:
    Aug 17, 2008
    Messages:
    6,573
    Likes Received:
    3,950
    Occupation:
    Design Engineer
    Location:
    Cumbria
    andrewshimmin likes this.
  16. Dag Bonnedal

    Dag Bonnedal New Member

    Joined:
    Mar 28, 2012
    Messages:
    183
    Likes Received:
    316
    Gender:
    Male
    Location:
    Stockholm, Sweden
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Goldie likes this.
  17. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Well, its good that NG has survived in India to the point where lines are now being upgraded to Broad Gauge
     
    lynbarn likes this.
  18. lostlogin

    lostlogin Member

    Joined:
    Jul 9, 2007
    Messages:
    428
    Likes Received:
    205
    For those interested in narrow gauge diesels, and possibly those that are not this appears to be a new video about the Talyllyn's Alf.

    I have to admit I found it a reasonably interesting watch as it was covering something different.
     
    huochemi, ragl, Steve and 2 others like this.
  19. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I've got a great affection for No.9 (Alf) as I was given the task of getting it going after it arrived on the T.R. Good to know its still going strong 39 years after I started it for the first time. Can't understand why they can't change from 1st to 2nd, though. We used to do it all the time using the centre slot to double-de-clutch.
     
    ragl likes this.
  20. MuzTrem

    MuzTrem Member

    Joined:
    Mar 13, 2011
    Messages:
    937
    Likes Received:
    1,225

Share This Page