If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Why weren't the Standards standard?

Discussion in 'Steam Traction' started by Reading General, May 25, 2017.

  1. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The LNER streamliners were speeding around many years before the 9F appeared on the scene and in any case, IMO the answer to your question is "no."
     
  2. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    Precisely!

    Which, allowing for acceleration, speed restrictions, slowing to drop slip coaches etc. would required 80 mph running.

    The Bristolian which was timetabled 105 mins for 118 miles, average 67 mph needed to run up to around 90 on a much more straightforward route.
     
    Spamcan81 likes this.
  3. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Due to flangeless drivers we will never know.
     
    Last edited: May 27, 2017
  4. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Now you're being silly.
     
    Last edited: May 26, 2017
  5. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    OK I stop.It is not that important.
     
  6. clinker

    clinker Member

    Joined:
    Oct 8, 2016
    Messages:
    569
    Likes Received:
    348
    Gender:
    Male
    Location:
    romford
    Heritage Railway Volunteer:
    No I do not currently volunteer

    I wasn't actually aware that I'd proposed anything
     
  7. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Arent Trolls From Norway/Sweeden, not Denmark.
     
    Spamcan81 likes this.
  8. oddsocks

    oddsocks Well-Known Member

    Joined:
    Nov 22, 2009
    Messages:
    1,813
    Likes Received:
    289
    Gender:
    Male
    Occupation:
    Retired / Dodging a Coffin for as long as I can.
    Location:
    Half a mile east of Snells Nook Halt. (1883-1931)
    Heritage Railway Volunteer:
    No I do not currently volunteer
    1940? I wasn't around at the time but I seem to remember being told that there was a war happening then and timetables were, shall we say, "relaxed".
     
  9. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed, and a 75 mph speed limit imposed.
     
  10. paullad1984

    paullad1984 Member

    Joined:
    Oct 16, 2007
    Messages:
    918
    Likes Received:
    428
    Thought it was 60mph?
     
  11. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You could be right. I think t was raised later, but started at 60.
     
  12. 1472

    1472 Well-Known Member

    Joined:
    Aug 26, 2008
    Messages:
    1,898
    Likes Received:
    2,517
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Well that's at least two of us that hav'nt got a clue what it is you are trying to say!
     
  13. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    And train weights increased quite markedly.
     
  14. clinker

    clinker Member

    Joined:
    Oct 8, 2016
    Messages:
    569
    Likes Received:
    348
    Gender:
    Male
    Location:
    romford
    Heritage Railway Volunteer:
    No I do not currently volunteer

    That was my first posting on this thread, IF and it's a big IF we believe the effectiveness of Swindon's standardisation policy, and IF we believe that St. Martin was rebuilt as the first of the Hall class, then the 'rebuilding' of Maindy Hall/Lady of Legend (which was described in Steam Railway as 'The sort of thing that Swindon was doing every day') 'should' have taken little longer the restoration of any other Barry Island Hall class, however that has not been the case, Whereas Tornado, a true new build was commenced with NO preconceived ideas about standards or using any components from existing locomotives has been around a few years now
     
  15. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The BR Standards were a sensible approach, IMHO. They looked at all the various components and generally took the best ideas for design,service and reliability and used them. Thus, they had GW style injectors, LMS & GWR boiler principles, LMS thinking on accessibility and prep and disposal, a fairly standard cab layout, etc, etc. Any idea that the majority of the bits on a Britannia and a Cl.2 tank are going to be the same is not realistic. Size is a major factor in that. The design may be similar but they are not going to be interchangeable. Yes, a lot of LMS latest practice found its was into them but hadn't a good bit of that come from the GWR with Stanier. At least, the bits he thought were good, such as the basic Churchward/Player Belpaire taper boiler. A lot of other GWR bits were either ignored altogether or discarded in a short time.
    Any idea that simply building more of one class would have been a better approach would not have been good if you want to move forward as a unified business. Take a class 5 4-6-0, for example. It may do the job, but any idea that a Hall was a convenient, well engineered piece of kit goes out of the window when you look at maintenance and ergonomics. A later design Black 5 is better in that respect but forget those LMS injectors and other details, large and small. Similarly with the B1 and the only advantage of the round topped parallel boiler was cost. The Southern didn't really have an equivalent design and, superb though they are, the Maunsell 4-6-0's were well out of date.
    I've worked on a lot of locos and, as a footplateman, I know which I'd prefer for day in, day out service.
     
  16. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,165
    This thread has drifted a long way: from how standard the standards were to Swindon standardisation and thence to how much the latter has or hasn't helped some rebuild projects. Maybe it should be split off, but meanwhile .....

    The rebuilding of Maindy Hall into Lady of Legend has involved much more than straighforward restoration of a Hall from scrapyard condition. Not just new driving wheels but a lot of other parts that are different from those on a Hall or anything else from Barry. The standardisation of parts between Swindon classes is really not very relevant to that particular project; more relevant to some other projects, notably the new Grange, though that again has required some major completely new parts.

    There are several reasons why the Saint project has taken longer than Tornado, not least that when the project was first conceived it was judged to be too difficult with the resources and expertise available at that time, so it was put on ice. The speed since it became an active project has still been a lot slower than some of us would have wished, but only because of the limited availability of manpower and money. Tornado was quicker because of the A1 Steam Locomotive Trust's unique management team and funding model.
     
    jnc likes this.
  17. williamfj2

    williamfj2 Member

    Joined:
    Dec 21, 2007
    Messages:
    637
    Likes Received:
    55
    Gender:
    Male
    Location:
    50A
    Maybe the A1 made better progress because a NEW build loco instead of a Frankenstein's monster loco attracts more attention plus the all important manpower and £££.
     
    35B and clinker like this.
  18. Copper-capped

    Copper-capped Part of the furniture

    Joined:
    Apr 19, 2017
    Messages:
    2,563
    Likes Received:
    3,316
    Gender:
    Male
    Location:
    Stanthorpe, QLD, Australia
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Well, now some people are making some sense! :)
     
  19. clinker

    clinker Member

    Joined:
    Oct 8, 2016
    Messages:
    569
    Likes Received:
    348
    Gender:
    Male
    Location:
    romford
    Heritage Railway Volunteer:
    No I do not currently volunteer


    This largely proves my original point WRT Swindon's standardisation policy, which was what heralded in the Saint project in the first place and which was the sort of thing that Swindon was doing everyday, and which, if I'm polite about it, was largely an inaccurate statement.
     
  20. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Strictly speaking it wasn't the only advantage. It was standard across a number of different classes (B1, O4/8, O1). This level of standardisation did not apply to the Stanier Black Fives - at least three boiler types married to different frame designs which produced extremely similar (but not identical) locomotives.

    Oooh, do tell? :)
     

Share This Page