If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Garratts - Why Not Cab Forward

Discussion in 'Steam Traction' started by johnofwessex, Jun 2, 2019.

  1. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It occurred to me when looking at the adverts for the new Hattons N Gauge LMS Garrett, why do Garretts always run Chimney first?

    While you would still have to look over the rear bunker/water tank why was it never attempted to build a 'cab forward' Garrett. The drivers view would be 'less worse' than looking towards the chimney and the crew would be less affected by smoke in tunnels.
     
  2. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It’s Garrats. Garretts were a make of steam road locomotive.
    My experience of South African steam is that Garratts didn’t always run chimney first.
     
  3. garth manor

    garth manor Well-Known Member

    Joined:
    Apr 10, 2009
    Messages:
    1,687
    Likes Received:
    450
    Agree a lot of my fotos are cab first, and tunnels were extremely rare where these locos were deployed, the principle was to make best use of relatively lightly laid lines and bridges that followed the contours to avoid expense such as tunnels.
     
  4. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I think the LMS Garratts ran cab first as much, if not more than, chimney first.
     
  5. Steve B

    Steve B Well-Known Member

    Joined:
    Jun 20, 2008
    Messages:
    2,069
    Likes Received:
    1,502
    Location:
    Shropshire
    The WHR Garratts obviously spend as much time running cab first as boiler first, but I seem to recall hearing somewhere that running cab first out of Porthmadog is preferred because it means cab first whilst working uphill through the tunnels for the reasons suggested above.

    I suspect that the idea that Garratts mainly worked boiler first may only be an impression - possibly there are more photos showing them boiler first as the photographers prefer them that way. For them to be turned would probably require the use of triangles - I certainly can't think of any British turntables being long enough - so I would imagine that most worked equally both ways.

    Steve B
     
  6. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    I think the general preference in South Africa was for running cab first whenever possible, for precisely the reason of smoke in tunnels and forward visibility. A lot of pictures of GMAs, GEAs and the like have them running cab first over routes like the Lootsberg pass, and I believe it was also preferred with the most powerful of them all, the GLs.

    Conversely, in East Africa I believe the crews liked to run the big class 59s chimney first. Of course, with anything as long as a Garratt having a preferred direction does depend on having adequate turning facilities. Otherwise, they have to be designed to be relatively easy to operate in both directions anyway.
     
    Wenlock likes this.
  7. odc

    odc Member

    Joined:
    Apr 11, 2006
    Messages:
    763
    Likes Received:
    30
    Occupation:
    Network Technician at St Albans School
    Location:
    Hemel Hempstead
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Some Garratts, particularly the AD60's in New South Wales were fitted with due controls for cab first running and DC is displaying alongside the number to those locomotive so fitted. the operational 6029 is one of those, though I'm not sure the rear facing controls were re-connected during restoration
     
  8. arthur maunsell

    arthur maunsell Well-Known Member

    Joined:
    Sep 6, 2008
    Messages:
    1,047
    Likes Received:
    140
    Location:
    by the fire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    you might want to edit that :)
     
    goldfish likes this.
  9. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Can see that a Forward cab and the Controls rear facing in the main cab would be useful on the bigger ones, but the forward cab would be the wrong side of an articulation which would make the control linkages pretty complex...
     
  10. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Didn't the Southern Pacific in the USA have some cab forward articulated?
     
  11. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    If they are mallets its a slightly different thing, both cabs are still on the main chassis/ boiler part of the loco ( like a double fairlie)
     
  12. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    There may well be a typo with the amount of “t” letters involved but where articulated steam locos are concerned, it’s most definitely Garratt.
     
  13. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    They did indeed. At least one is preserved.
     
  14. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Only one, regrettably. It's to be found, stuffed and mounted, in Sacramento Ca:

    download.jpeg.jpg
    (Image courtesy Wikipedia)

    While we're about it, any objections to a totally gratuitous plug for the Californian State Railroad Museum? ..... Tough! .... here's their url:
    https://www.californiarailroad.museum
     
    Britfoamer and marshall5 like this.
  15. andrewshimmin

    andrewshimmin Well-Known Member

    Joined:
    Mar 18, 2011
    Messages:
    1,761
    Likes Received:
    2,160
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The EAR ones had to cope with a lot of very long and steep climbs, but few or possibly no tunnels. I suppose boiler up hill has se advantages for keeping the firebox crown covered, although on this line there was steep climbing in both directions, at least west of Nairobi. The big 59 class only operated east of Nairobi where the climbing was all in one direction.
    In all the pictures I can find, the EAR ones are working chimney first. As you say, hard to know if this is photography bias or was real operational preference, but I suspect the latter as I can't find any photos of cab first.
    The EAR had triangles for turning.
     
  16. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Garratt country in South Africa wasn't exactly flat. Some amazing climbs in Natal for example..
     
    Martin Perry likes this.
  17. andrewshimmin

    andrewshimmin Well-Known Member

    Joined:
    Mar 18, 2011
    Messages:
    1,761
    Likes Received:
    2,160
    Heritage Railway Volunteer:
    No I do not currently volunteer
    True.
    In these contexts I think the gradient profile of the EAR is worth restating:

    (Compared to the WCML)[​IMG]
     
    jnc, Britfoamer, mdewell and 3 others like this.
  18. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Do I recognise that there diagram from Dusty Durrant's tome on bendy things? A jolly good read.
     
  19. andrewshimmin

    andrewshimmin Well-Known Member

    Joined:
    Mar 18, 2011
    Messages:
    1,761
    Likes Received:
    2,160
    Heritage Railway Volunteer:
    No I do not currently volunteer
    That or one like it. I'm afraid I can't remember, or I would have given the reference.
     
  20. arthur maunsell

    arthur maunsell Well-Known Member

    Joined:
    Sep 6, 2008
    Messages:
    1,047
    Likes Received:
    140
    Location:
    by the fire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    it's an eye opener away! Are those lines still open? even with diesel it would be memorable!
     

Share This Page