If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

P2 Locomotive Company and related matters

Discussie in 'Steam Traction' gestart door class8mikado, 13 sep 2013.

  1. The Green Howards

    The Green Howards Nat Pres stalwart

    Lid geworden:
    20 feb 2016
    Berichten:
    15.605
    Leuk Bevonden:
    9.215
    Beroep:
    Layabout
    Locatie:
    My settee, mostly.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes, I'd like to have attended but two days of work came up so they take priority nowadays...
     
  2. pmh_74

    pmh_74 Part of the furniture

    Lid geworden:
    28 jan 2009
    Berichten:
    2.693
    Leuk Bevonden:
    2.183
    Don't quote me as I can't be bothered to check properly, but I thought I saw a comment on FB that the paint had to be removed to get it to go on!
     
  3. Foxhunter

    Foxhunter Member

    Lid geworden:
    9 jun 2011
    Berichten:
    592
    Leuk Bevonden:
    710
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The date of the Convention had been set for Saturday 3rd October and Covenantors have been advised of this in The Communication Cord. This event was aimed at Club members and supporters and does not replace the Convention in any way. The aim is to hold more of these gatherings as assembly accelerates, as an exclusive reward for supporters of relevant Clubs as their component(s) is/are fitted.

    David Elliott prescribed 'wet assembly' to reduce corrosion.

    Foxy
     
    Sheff vindt dit leuk.
  4. osprey

    osprey Resident of Nat Pres

    Lid geworden:
    3 okt 2007
    Berichten:
    11.981
    Leuk Bevonden:
    3.399
    Beroep:
    semi-retired, currently doing R&D for my patents
    Locatie:
    Halifax
    "Wet assembly"....but paint a no no. Having met Mr Elliott I would think he would be horrified at the use of paint.
     
  5. Steve

    Steve Nat Pres stalwart Friend

    Lid geworden:
    7 okt 2006
    Berichten:
    13.794
    Leuk Bevonden:
    14.855
    Beroep:
    Gentleman of leisure, nowadays
    Locatie:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    So what is being meant by wet assembly, then?
     
    Sheff en The Green Howards vinden dit leuk.
  6. 007

    007 Member

    Lid geworden:
    3 nov 2012
    Berichten:
    475
    Leuk Bevonden:
    978
    All this effort going into this amazing front end, roller bearings etc...

    Still going to be hand fired with Coal? Surely this is the chance to oil fire this engine properly from the start.
    Much more versatile, easy fuelling, clean and no fire risk. I would chuck money at this project if it was brave enough to take this path and future proof 2007.
     
  7. Kylchap

    Kylchap Member

    Lid geworden:
    15 dec 2015
    Berichten:
    525
    Leuk Bevonden:
    1.009
    Geslacht:
    Man
    Locatie:
    East Anglia
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Apologies, I missed that. The date is indeed mentioned in CC78 that I received on 13 June. "Full details will be sent imminently". I await eagerly.
     
  8. W.Williams

    W.Williams Well-Known Member

    Lid geworden:
    20 dec 2015
    Berichten:
    1.708
    Leuk Bevonden:
    1.623
    Beroep:
    Mechanical Engineer
    Locatie:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    is it paint, or is it red oxide? Not exactly the same thing...
     
  9. Andy B

    Andy B Member

    Lid geworden:
    31 jul 2007
    Berichten:
    564
    Leuk Bevonden:
    1.026
    Locatie:
    Bristol
    I don’t know the engineering principles, but I worked with an engineer (fellow of the mechanicals) and where ever we did riveting of plates there was always a liberal coating of anti corrosive primer applied to both sides before bolting up whilst still wet and then riveted. Always seemed good idea when you saw the amount of jack rust on unrestored items.
     
  10. Sheff

    Sheff Resident of Nat Pres

    Lid geworden:
    21 apr 2006
    Berichten:
    8.695
    Leuk Bevonden:
    4.158
    Geslacht:
    Man
    Beroep:
    Retired Engineer & Heritage Volunteer
    Locatie:
    Leicestershire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I’m struggling to see the downside. I’d certainly want something on the mating faces to prevent moisture ingress causing rusting.
     
  11. W.Williams

    W.Williams Well-Known Member

    Lid geworden:
    20 dec 2015
    Berichten:
    1.708
    Leuk Bevonden:
    1.623
    Beroep:
    Mechanical Engineer
    Locatie:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The only downside really is clearence, its another tolerance to be accounted for.

    Its a fine enough idea, and in practive, eventually, moisiture will still get in there and corrosion will still happen. This is just an attempt to slow that process.
     
  12. std tank

    std tank Part of the furniture

    Lid geworden:
    20 sep 2005
    Berichten:
    4.052
    Leuk Bevonden:
    1.182
    Geslacht:
    Man
    Beroep:
    Retired
    Locatie:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Nowt wrong with some grease on the faces, surely?
     
    W.Williams vindt dit leuk.
  13. 5944

    5944 Resident of Nat Pres

    Lid geworden:
    14 jan 2006
    Berichten:
    10.518
    Leuk Bevonden:
    13.106
    Geslacht:
    Man
    Beroep:
    Train Maintainer for GTR at Hornsey
    Locatie:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Indeed, but it depends on clearances and tolerances. No point in painting the surfaces if it gets scratched and damaged when the cylinders are installed.
     
  14. Sheff

    Sheff Resident of Nat Pres

    Lid geworden:
    21 apr 2006
    Berichten:
    8.695
    Leuk Bevonden:
    4.158
    Geslacht:
    Man
    Beroep:
    Retired Engineer & Heritage Volunteer
    Locatie:
    Leicestershire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    You coat with whatever at the point of assembly, so it gets squished as the bolts / rivets are tightened.
     
  15. Bikermike

    Bikermike Well-Known Member

    Lid geworden:
    11 mrt 2020
    Berichten:
    2.316
    Leuk Bevonden:
    2.654
    Geslacht:
    Man
    Locatie:
    Thameslink territory
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There are some brake caliper bolts on a bike that are not to be greased as it affects the torque rating. (Presumably this can't be factored in due to lack of control of grease levels).
    It's interesting as all the other new-builds are going for metal-metal contact.
    Assuming it's not a friction fit, there will be some gap between the two. But could a build-up of paint cause a layer that not crushed entirely by the fitting, and then wear away later through chemical decomposition?

    Maybe we should strip Tornado down and find out how it's doing...?
     
  16. W.Williams

    W.Williams Well-Known Member

    Lid geworden:
    20 dec 2015
    Berichten:
    1.708
    Leuk Bevonden:
    1.623
    Beroep:
    Mechanical Engineer
    Locatie:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Same result, different timeframe.
     
  17. Steve

    Steve Nat Pres stalwart Friend

    Lid geworden:
    7 okt 2006
    Berichten:
    13.794
    Leuk Bevonden:
    14.855
    Beroep:
    Gentleman of leisure, nowadays
    Locatie:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It was traditional to use red lead on surface to be riveted, painted on at assembly time. That's a no-no these days and I would suggest that micaceous iron oxide is the best alternative.
     
  18. Jimc

    Jimc Part of the furniture

    Lid geworden:
    8 sep 2005
    Berichten:
    4.183
    Leuk Bevonden:
    4.955
    Beroep:
    Once computers, now part time writer I suppose.
    Locatie:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    And I for one loathe the smell of oil fired and wouldn't travel behind it. As bad as being behind a diesel.
     
    blink bonny vindt dit leuk.
  19. torgormaig

    torgormaig Part of the furniture Friend

    Lid geworden:
    17 jul 2007
    Berichten:
    5.537
    Leuk Bevonden:
    9.719
    Thats a bit of a sweeping statement. Surely it depends on the type of oil (liquid fuel) being used. Thick Bunker C fuel is very different to diesel oil which is different again to recycled chip fat. I'm sure that they smell differently too but I've never noticed it. Last year I travelled behind a pair of 01 Pacifics in Germany, one 01.1075 being coal fired and the other 01.1104 being oil fired. The only discernable difference between the two that I could tell was how much cleaner the latter was.

    There are many issues surrounding the adoption of oil firing on preserved locos in this country but I don't believe that nasty niffs can really be considered one of them.

    Peter
     
    Sheff vindt dit leuk.
  20. guycarr360

    guycarr360 Part of the furniture

    Lid geworden:
    4 okt 2005
    Berichten:
    5.462
    Leuk Bevonden:
    3.683
    Geslacht:
    Man
    Locatie:
    Chester le Street County Durham

Deel Deze Pagina