If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Bodmin ‘Austerity’ returns to steam

Discussion in 'Steam Railway' started by Thomas Bright, Nov 1, 2017.

    Bagnall ‘Austerity’ Works No. 2766 has made its first ‘long-distance’ trips in preservation, having completed its first trial run on the Bodmin & Wenford Railway.

    [​IMG]
    Resplendent in WD khaki livery, newly restored ‘Austerity’ No. 75178 rests outside Bodmin General shed on October 14. JIMMY JAMES

    Restored by the Cornish Steam Locomotive Preservation Society – which also owns Port of Barr 0-4-0STs Alfred and Judy, and Devonport Dockyard 0-4-0ST No. 19 – the 0-6-0ST has been outshopped in its original guise as WD No. 75178.

    Other than 100 yards up and down the yard at Bodmin General earlier in the year (see SR467), the trial run on October 14 was the locomotive’s first move under its own steam in over 22 years.

    BWR Publicity Officer Jimmy James says: “Three miles were accomplished light engine in the yard and down the Boscarne branch towards Crabtree Lane. [CSLPS chairman] Phil Hawke was delighted with No. 75178's initial performance, except for the lubricator which couldn't be coaxed into full action.

    “This will now have to be stripped down and re-assembled when the fault is found. Running-in trials will then resume.”

    Although it had been hoped to enter traffic this summer, Mr James told Steam Railway that the ‘Austerity’ is now likely to enter service next year.

    “Once the lubricator is fixed there will be plenty more running-in trials, leading up to a fully loaded test train, but not in time for any scheduled services. As for 2018 and the loco roster, it remains to be seen.”

    Continue reading...
     
    Bluenosejohn and Martin Perry like this.
  1. fergusmacg

    fergusmacg Resident of Nat Pres

    Joined:
    Aug 17, 2008
    Messages:
    6,573
    Likes Received:
    3,950
    Occupation:
    Design Engineer
    Location:
    Cumbria
    The Reach Rod has a somewhat different shape to the normal straight one - any reason why?
     
  2. 3855

    3855 Member

    Joined:
    Sep 27, 2008
    Messages:
    604
    Likes Received:
    443
    Gender:
    Male
    Location:
    inside a boiler
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I suspect thats because it was fitted with a gas producer during it's life which would have included bushed holes through the inner and outer fire boxes to improve combustion. The standard reach rod would have been in the way of the holes hence the revised shape.
     
    26D_M likes this.
  3. fergusmacg

    fergusmacg Resident of Nat Pres

    Joined:
    Aug 17, 2008
    Messages:
    6,573
    Likes Received:
    3,950
    Occupation:
    Design Engineer
    Location:
    Cumbria
    Good thought although I don't recall seeing such a modification before:-

    [​IMG]
     
  4. fergusmacg

    fergusmacg Resident of Nat Pres

    Joined:
    Aug 17, 2008
    Messages:
    6,573
    Likes Received:
    3,950
    Occupation:
    Design Engineer
    Location:
    Cumbria
    Had a look round and there are several examples that show the need for a bent reach rod on Gas Producer locos!
    (see the photos of Hunslet No.2879 of 1943. This loco, named 'Diana' is seen at Wheldale colliery on the page below)

    https://www.martynbane.co.uk/modernsteam/ldp/austerity/locophotos.htm

    Interesting that some gas producer locos had it and others not (I remember Fred in the 70s on the K&WVR with its straight rod and holes in the firebox).

    Thanks
     
    Last edited: Nov 8, 2017
  5. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Nice to see an Austerity carrying its WD number and livery.
     
  6. fergusmacg

    fergusmacg Resident of Nat Pres

    Joined:
    Aug 17, 2008
    Messages:
    6,573
    Likes Received:
    3,950
    Occupation:
    Design Engineer
    Location:
    Cumbria
    It is and beats that fake BR black some are put out in - although I do understand it did no service for the WD and spent all its time in store with them before being sold to the NCB.
     
    William Fletcher likes this.
  7. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Does anybody know the Middle East allocations of WD Diesel shunters?

    Sorry to hijack the thread but reading this sparked my query.
     
  8. 3855

    3855 Member

    Joined:
    Sep 27, 2008
    Messages:
    604
    Likes Received:
    443
    Gender:
    Male
    Location:
    inside a boiler
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I have hence the gentle suggestion...
     

Share This Page